This paper proposes a combination of novel Received Response (RR) sequence at the transmitter and a Matched Filter-RAKE (MF-RAKE) combining scheme receiver system for the Direct Sequence-Code Division Multiple Access Ultra Wideband (DS-CDMA UWB) multipath channel model. This paper also demonstrates the effectiveness of the RR sequence in Multiple Access Interference (MAI) reduction for the DS-CDMA UWB system. It suggests that by using conventional binary code sequence such as the M sequence or the Gold sequence, there is a possibility of generating extra MAI in the UWB system. Therefore, it is quite difficult to collect the energy efficiently although the RAKE reception method is applied at the receiver. The main purpose of the proposed system is to overcome the performance degradation for UWB transmission due to the occurrence of MAI during multiple accessing in the DS-CDMA UWB system. The proposed system improves the system performance by improving the RAKE reception performance using the RR sequence which can reduce the MAI effect significantly. Simulation results verify that significant improvement can be obtained by the proposed system in the UWB multipath channel models.

Mobile communication have become an important part of telecommunications. Original applications like paging, mobile phones or GPS have shown a tremendous growth, and new applications are emerging every day: tagging, wireless computer links, wireless microphones, remote control, wireless multimedia links, satellite mobile phones, wireless internet. Mobile means light, small, with low energy consumption and appealing designs. Technology has evolved very fast to satisfy these needs in rapidly growing markeds: chips are becoming smaller, consume less current, are more efficient and perform more complex operations. The antennas however have not experienced the same evolution, as the size of an antenna is mainly dictated by the frequency band it has to transmit or receive. Thus, the art of antenna miniaturization is an art of compromise: one has to design the smallest possible antenna, which is still suitable for a given application regarding its radiation characteristics. Or in other words, one looks for the best compromise between volume, bandwidth and efficiency. In this paper, we will go through classical design techniques, starting from ultra small antennas and going UWB antennas over multiband designs.

This paper proposes a combination of adaptive equalizer and Least Mean Square-RAKE (LMS-RAKE) combining scheme receiver system for Direct Sequence-Ultra Wideband (DS-UWB) multipath channel model. The main purpose of the proposed system is to overcome the performance degradation for UWB transmission due to the occurrence of Inter-Symbol Interference (ISI) during high speed transmission of ultra short pulses in a multipath channel. The proposed system improves the system performance by mitigating the multipath effect using LMS-RAKE receiver and suppressing the ISI effect with the adaptive equalizer. Simulation results verify that significant equalization gain can be obtained by the proposed system especially in UWB multipath channel models such as channel CM3 and channel CM4 that suffered severe ISI effect.

A packet detection method for zero-padded orthogonal frequency division multiplexing (OFDM) transmission is presented. The proposed algorithm effectively conducts packet detection by employing both an M-sample time delayed cross correlation value, and a received signal power calculated by using the received input samples corresponding to the zero padding (ZP) intervals or less.

This paper proposes a novel technique in designing the optimum pulse shape for ultra wideband (UWB) systems under the presence of timing jitter. In the UWB systems, pulse transmission power and timing jitter tolerance are crucial keys to communications success. While there is a strong desire to maximize both of them, one must be traded off against the other. In the literature, much effort has been devoted to separately optimize each of them without considering the drawback to the other. In this paper, both factors are jointly considered. The proposed pulse attains the adequate power to survive the noise floor and at the same time provides good resistance to the timing jitter. The proposed pulse also meets the power spectral mask restriction as prescribed by the Federal Communications Commission (FCC) for indoor UWB systems. Simulation results confirm the advantages of the proposed pulse over other previously known UWB pulses. Parameters of the proposed optimization algorithm are also investigated in this paper.

This paper analyses the autocorrelation function of return waveforms in high precision radar altimeters employing chirp-pulse transmit signal under the condition of near-nadir deviations of the antenna boresight axis. It is shown that in case of ultra wideband transmit signals providing very high time resolution the correlation function can be approximated by a product of two separate functions of time.

The transmit power of Ultra Wideband (UWB) is limited in short range communications to avoid the interference with existing narrow-band communication systems. Since this limits UWB communication range, this paper proposes a novel relay scheme that uses shared frequency repeaters for impulse UWB signal relay to improve system range. After considering possible problems with the repeater, in particular the coupling interference between the input and output and relay-delay, a switching control method is proposed that offers short relay-delay and suppresses the coupling interference at the repeaters. With respect to the proposed relay scheme, Pulse-Position-Modulation (PPM) UWB-based signal relay is evaluated by analyzing its BER performance using the point-to-point transmission link model.

This paper proposes a new method which simultaneously undertakes ranging and communications based on the PHY of MB-OFDM technology. A transmitter modulated one or multiple OFDM subcarriers with a low-frequency (1.05 MHz) ranging signal; and a receiver sampled the received signal at a 3.2-MHz sampling rate to estimate the time of arrival of the ranging signal. This configuration and an additional protocol supporting bidirectional ranging achieved a 140-mm resolution (equivalent to 2.15 GHz sampling). This method does not modify the PHY but only changes the baseband signal processing. The validity of this method was demonstrated using computer simulation and prototype experiments.

An enhanced Ultra Wideband (UWB) signaling scheme that employs PSWF (Prolate Spheroidal Wave Functions)-based orthogonal chip pulses and ternary complementary code sets is proposed for Direct-Sequence (DS) UWB systems. Every information bit of each user is modulated and transmitted over a set of parallel sequences of PSWF-based orthogonal chip pulses and are further assigned to a ternary complementary code set with additional zero padding if necessary. Moreover, the ternary complementary code sets are generated to be mutually orthogonal and assigned to any pair of multiple users. Hence, the mitigation of multipath interference as well as multiple user interference (MUI) can be expected. Furthermore, the ternary code length can be greatly shortened by taking advantage of pulse and code orthogonality. Thus, the proposed transmission scheme is especially suitable for high data rate DS-UWB systems that offer very high flexibility.

Ultra wideband (UWB) signal propagation was measured and characterized in comparison with narrowband in a passenger-car compartment, to accommodate the design of new wireless devices for the safety and comfort of passengers. Spatial distributions of UWB and narrowband path gain, delay profiles, and delay spreads within the compartment were derived from frequency-domain responses (from 3.1 to 10.6 GHz) measured with a vector network analyzer. Whereas narrowband channels resulted in a number of dead spots (deep fading points), UWB yielded none, though some frequency dispersion was inevitable. Fading depth versus occupied bandwidth was also derived, which indicated superiority of UWB over narrowband systems from the viewpoint of link budget. Comparison with two other environments was also made in the received energy contained in a given number of multipath components.

In this paper, an Ultra-Wideband (UWB) double-directional channel sounding measurement and spatio-temporal analysis of UWB propagation based on the clusterization approach were reported. After separating the propagation paths and diffuse components both on the transmitter (Tx) antenna and receiver (Rx) antenna positions, the propagation paths both on Tx and Rx positions were observed for clusters separately, while coupling the clusters between Tx and Rx position based on similar time of arrivals, and ray tracing by utilizing high temporal and spatial resolution, respectively. The relation between direction of departure and direction of arrival will then be investigated. For cluster properties, parameters of model characteristics are discussed and compared to other earlier works.

Coexisting with many concurrent narrowband services, the performance of UWB systems will be affected considerably by them. Specifically, IEEE 802.11a systems which operate around 5 GHz and overlap the band of UWB signals will interfere with UWB systems significantly. In this paper, a novel narrow-band interferences (NBI) suppression technique based on singular value decomposition (SVD) algorithm for a direct sequence ultra-wideband (DS-UWB) communication system is presented. SVD is used to approximate the interferences which then are subtracted from the received signals. The proposed technique is simple and robust. Simulation results show that the proposed new technique is very effective.

A small microstrip-fed monopole antenna using an L-shaped notch is presented for ultra wideband applications. The proposed antenna, with compact size of 15.521 mm2 including the ground plane, is designed to operate over the frequency band between 3.05 and 10.9 GHz for S11 < -10 dB. Good return loss and radiation pattern characteristics are obtained in the frequency band of interest.

In this paper, three new ultra wideband (UWB) communication systems with quadrature-phase shift keying (QPSK) impulse modulation are proposed. First, direct-sequence (DS) multiple-access scheme is applied. The second proposed system is based on time-hopping (TH) multiple-access scheme. The last proposed system applies TH multiple-access scheme with QPSK impulse modulation and pulse position modulation (PPM). The conventional UWB communications as TH scheme with PPM modulation and DS scheme with binary-phase shift keying (BPSK) are used to compare. The simulation results show that all proposed UWB communication systems can provide obviously better performances compared with the conventional TH-PPM and DS-BPSK UWB communication systems. The comparisons in aspects of transmission bit rate and the number of users are also investigated.

This paper introduces a state-of-art on an ultra-wideband (UWB) technology in intelligent transport systems (ITS). To examine the detection performance of a UWB short-range radar for vehicular applications, we developed a 26-GHz band short-range UWB radar system with an embedded compact MMIC-based RF module. In this paper, we briefly comment on the current regulatory environment for UWB radar systems by outlining the structure of an international organization involved in examining the regulatory status of these systems. We then describe the principles of detection and system design for impulse radar, the radar system that we developed, and a MMIC-based RF module as well as the performance of these devices. We measured their performance in a series of laboratory experiments and also measured UWB radar cross sections of an automobile. The results of our experiments suggest that our radar system is capable of detecting targets with a range resolution of around 9 cm.

This paper proposes wavelet packets for use in ultra wideband communications. The pulse shapes that are generated are quasi orthogonal and have almost identical time duration. After normalization, an M-ary signaling set can be constructed allowing higher data rate. Finally, the performance of such a system when multipath propagation occurs is investigated by computer simulations. In order to combat multipath fading, a Rake receiver using coherent channel estimation is designed. This channel estimation is carried out using adaptive algorithms such as least-mean square (LMS), normalized least-mean square (NLMS), or recursive least square (RLS) algorithms which adapt the received signal given a reference signal.

Short-range propagation measurements were carried out using ultra wideband (UWB) and continuous wave (CW) signals on a rectangular aluminum conductive plate, simulating typical office desks, with and without a low vertical metal partition panels. The frequency of the UWB signal spanned from 3.1 to 10.6 GHz and that of the CW signal was 6.85 GHz. A vector network analyzer and two omnidirectional UWB antennas were used to obtain the frequency-domain response of the propagation paths. With the partition panel, the CW reception level showed approximately a 20-dB spatial variation, induced by the interference between the direct and the reflected waves, but the UWB reception level had no particular plunges. The additional losses were also measured when the 500-mm propagation path was blocked with a human arm, a coffee cup, and a copy paper pile and when the receiving antenna was covered with a human palm on the plate without the partition panel. The maximum additional propagation losses were found as follows: 10-12 dB by a human arm, 10 dB with a coffee cup, and 2 dB with a paper pile. Further additional loss caused by a palm covering the antenna was found to be 10 to 12 dB, mainly due to palm absorption.

This paper studies power spectrum density (PSD) of multi-user aggregate time hopping (TH) ultra wideband (UWB) signal with asynchronous transmission and synchronous transmission. TH codes under consideration are deterministic periodic code and random integer code. Based on the PSD, the in-band interference power for TD SCDMA is investigated as function of UWB system parameters. Two UWB modulations, TH pulse position modulation (PPM) and TH BPSK, are considered for calculating the in-band interference power. The numerical results indicate that asynchronous transmission is an effective way to decrease the peak in-band interference caused by multi-user aggregate TH-PPM UWB signal. Although increasing the maximum of time hopping code elements can smooth the PSD of TH UWB signal, it is not a good idea for reducing the peak in-band interference for TD SCDMA. For the random integer TH code, while only TH UWB continuous spectral exists in TD SCDMA band or multi-user signals of TH UWB are transmitted asynchronously, the in-band interference for TD SCDMA is in proportion to the number of the UWB users. For TD SCDMA in which band discrete spectral line exists the in-band interference caused by TH UWB with synchronous transmission is in proportion to the square of the number of the UWB users.

Ultra Wideband (UWB) communication system utilizing impulse signals is attractive technique which can achieve high data rate with low complexity and low power consumption. In this impulse based UWB system, lots of different shaped pulses have been considered to represent more information bits per symbol. In order to detect these different shaped UWB signals at the receiver, the synthesized template generation method using several elementary waveforms is effective. In this paper we design and analyze this synthesized template waveform instead of the conventional matched filter technique. The synthesis of UWB template waveform can be achieved as combinations of orthogonalized elementary waveforms with Fourier coefficients. By adjusting the number of elementary waveforms and their coefficients, it is possible to detect several types of UWB signals. The orders of approximation corresponding to different number of elementary waveforms are analyzed and the bit error rate properties are then investigated in AWGN and multipath fading channels. In addition, the proposed system can capture more energy by adjusting its coefficients adaptively under the multipath environment and reduce the effect of Intra-Pulse Interference (IPI) which is occurred when the propagation channel is not separable, that is, multipath components spaced closer than the typical pulse width. We show the design of the adaptive template synthesis method and its performance compared with conventional Rake receiver.

In this paper we present a novel method for improving RAKE receiver reception in UWB systems. Due to the fact that practical pulses that can be produced for UWB-IR (Ultra Wideband-Impulse Radio) may occupy a longer time than the typical multipath resolution of the actual UWB channel, multiple channel components may arrive within this typical pulse width. Performance degradation may occur due to the resulting intrapulse (overlapping received pulses) interference. We here propose an adaptive, pilot aided RAKE receiver for UWB communications in the multipath environment. The proposed system estimates the actual received signal with intrapulse interference in each RAKE finger using projections onto a Hadamard-Hermite subspace. By exploiting the orthogonality of this subspace it is possible to decompose the received signal so as to better match the template waveform and reduce the effects of intrapulse interference. By using the projections onto this subspace, the dimension of the received signal is effectively increased allowing for adaptive correlator template outputs. RAKE receivers based on this proposal are designed which show significant performance improvement and require less fingers to achieve required performance than their conventional counterparts.